Ducted / General Pupose / Ductless Fume Hood and Canopy Hood are required in a lab to prevent harmful and toxic gases from leaking into the working environment. It is designed to create a protective barrier between the lab personnel and the chemical fumes produced during experiments or testing. The fumes are drawn away from the fume hood’s chamber by a strong exhaust system.
Dsigntory Fume Hood and Canopy Hood shall be provided to prevent the buildup of fugitive emissions in the laboratory. A general room ventilation system shall be designed such that the placement of supply and exhaust maximize the clearance of contaminants from the room. A range of high efficiency fume hoods is available with the following features.
Standard Structure:
– Conveniently sited service outlets
– Aerodynamic fascia
– Internal baffles to balance air movements
– Easy Remove Service Fitting Panels on fascia and service access panels in the interior walls
– Controls for services mounted on and serviced from the front fascia
– Safe sash design to operate with timing belt to prevent the sash from falling
– Air-bypass for velocity compensation designed to avoid leakage of fumes especially when there are thermal rises in the working chamber.
Fume Hood Accessories:
Inner Hood: Fiber Reinforced Polyester (FRP)
External Hood: 1mm(t) EG Sheet, Epoxy Powder Coated Finish.
Base Cabinet: Swing Door, EG Sheet, Epoxy Powder Coated Finish.
Worktop: Phenolic 15mm(t) With Anti-Spill Edge Finish.
Sash: Clear Glass 5mm(t).
– 10 Watts Light
– 13 Amp Electrical Socket
– Light Switch
– Water Outlet & Remote Control
– Drip Cup
– Pressure Gauge
– Gas